Grow 2-1-6™ is one of three components that create the complete Cutting Edge Solutions® 3-Part Base family. Grow 2-1-6™ is only used in the vegetative and transitional stages of plant life. During full flower stage, the use of Grow 2-1-6™ is discontinued.
Sizes Available: 1 quart, 1 gallon, 2.5 gallon, 6 gallon, 15 gallon, 55 gallon barrel, and 270 gallon tote.
Total Nitrogen (N) 2.0%
0.2% Ammoniacal Nitrogen
1.8% Nitrate Nitrogen
Available Phosphate (P2O5) 1.0%
Soluble Potash (K2 O) 6.0%
Derived from: Ammonium Sulfate, Potassium Nitrate, Magnesium Phosphate, and Potassium Carbonate.
Information regarding the contents and levels of metals in this product is available at: http://www.aapfco.org/metals.html
FULL STRENGTH
For Drain to Waste / Soil Applications: check brochure / website mixing ratios
Micro 6-0-0™ Bloom 0-6-5™ Grow 2-1-6™
Clones & Seedlings (after roots) 5 ml/gal 5 ml/gal 10 ml/gal
Vegetative Stages (1 – 2 weeks) 8 ml/gal 5 ml/gal 15 – 20 ml/gal
Early Flowering
Transition Stage (1 – 2 weeks) 8 ml/gal 15 ml/gal 5 ml/gal
Full Bloom
Fruiting Stage (4 – 8 weeks) 8 ml/gal 15 – 20 ml/gal none
Flush Stage (5 – 10 days) 2.5 ml/gal 5 ml/gal none
| Teaspoon | Tablespoon | Fluid Ounce | Quart | US Gallon |
|---|---|---|---|---|
| 5 ml | 15 ml | 30 ml | 946 ml | 3.785 liters |
Grow 2-1-6™ is a highly concentrated solution. Never mix undiluted concentrates as this may result in nutrient lock-up. Add each nutrient separately to water and aerate reservoir regularly. Shake well and measure carefully using a milliliter measuring cup. If using Micro 6-0-0™, add Micro 6-0-0™ first to water, then other nutrients.
After nutrients are mixed in water, adjust pH to 4.5-6.5.
Monitor ppm and EC in reservoir and top off with fresh water as needed.
Reservoir temperature should be 60-68 degrees F.
Do not store product in direct sunlight. Do not freeze.
Grow 2-1-6™ is designed for use in hydroponics, soilless, continuous feed, drain to waste, and for use in soil growing applications.